ST-Link V2 STM8 SMT32 Programmer/Debug

Thông tin sản phẩm ST Link V2 trên trang ST.COM

All features

• 5 V power supplied by a USB connector
• USB 2.0 full-speed compatible interface
• USB Type-A to Mini-B cable provided
• SWIM specific features:
  • 1.65 V to 5.5 V application voltage support on the SWIM interface
  • SWIM low-speed and high-speed modes support
  • SWIM programming speed rates: 9.7 kbyte/s in low-speed, 12.8 kbyte/s in high-speed
  • SWIM cable for connection to an application with an ERNI standard connectorVertical connector reference: 284697 or 214017Horizontal connector reference: 214012
  • SWIM cable for connection to an application with pin headers or 2.54 mm pitch connector
• JTAG/serial wire debug (SWD) specific features:
  • 1.65 V to 3.6 V application voltage support on the JTAG/SWD interface and 5 V tolerant inputs
  • JTAG cable for connection to a standard JTAG 20-pin 2.54 mm pitch connector
  • JTAG support
  • SWD and serial wire viewer (SWV) communication support
• Direct firmware update support (DFU)
• Status LED blinking during the communication with the PC
• Operating temperature from 0 °C to 50 °C
• 1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only)